Off-Grid Illumination Built for Safety and Savings

This solar LED area light delivers the brightness parking lots, driving lanes, industrial yards, and remote perimeters need for safety and security, without the cost of trenching, conduit, or a utility connection to get there. Typically covering 2,500+ sq ft at full brightness, it combines three independently aimable lenses, intelligent programming that blends timed dimming with motion-sensing activation, and a 922Wh LiFePO4 battery for precise, reliable off-grid illumination.

• No Compromise Between Charging and Coverage: The solar panel tilts ±15° to capture peak sun, while the lenses aim independently to put light exactly on the parking lot, driving lane, or perimeter that needs it. Unlike all-in-one fixtures with a fixed panel and lens, aiming the light here never means the panel tilts to a poor charging angle.
• Light When It's Needed, Not a Watt Wasted: An intelligent 5-stage night mode steps brightness down through the night — 100% for the first 30 minutes, tapering to 10% by early morning — then brightens automatically when built-in motion detection senses someone approaching. Safety stays high, battery drain stays low.
• Programmable to Fit Your Site: Prefer constant illumination over motion sensing and timed dimming? Our team can custom-program this fixture for all-night steady output at a reduced level, well suited to security perimeters, loading docks, and industrial sites where predictable lighting is the priority.
• Reliable Through Extended Cloudy Stretches: A 922Wh LiFePO4 battery rated for 2,000+ charge cycles, roughly 5 to 7+ years of nightly use, delivers up to 4 days of autonomy in intelligent night mode, while an MPPT charging controller keeps pulling in usable power on overcast days when standard PWM controllers fall short.
• Fits the Poles You Already Have: The included slip-fitter bracket suits most 60mm round poles and side arms, with optional adapters available for wall mounts, corner mounts, L-shape and T-shape configurations, and 100x100mm square poles — install on existing infrastructure instead of replacing it.
• Built to Run Outdoors, Year-Round: IP65 sealing keeps dust and water out permanently, so the fixture performs the same in a downpour in year three as it did on day one.

Ideal Applications

1. Parking Lots & Driving Lanes
2. Roadways & Pathways
3. Campus Plazas & Interior Common Areas
4. Remote & Rural Sites: Farms, construction sites, rural commercial properties, and campgrounds where extending grid power to every pole location is cost-prohibitive or impossible — and where reliable security lighting still matters for deterring theft and vandalism.
5. New Development & Expanding Sites: Add security-grade area lighting to a growing parking lot or facility perimeter before permanent electrical infrastructure is even in place — no trenches, no new circuits, and poles that can relocate as the site evolves.
6. Municipalities & Public Spaces: Roadside and pathway lighting for municipalities where grid infrastructure is limited, aging, or absent — improving public safety without requiring an electrician for installation.

Why Buy Commercial Grade?

Cheap solar area lights often advertise inflated equivalency numbers that don't reflect real output, and they claim "commercial grade" seals while failing to disclose battery chemistry. A solar light is a system made up of many components, and each of them must be commercial grade to stand up to long-term service. Here's what separates our truly commercial grade fixtures from cheap marketplace alternatives.

A solar fixture is a system — panel, battery, controller, and LED all have to perform together. A waterproof housing doesn't mean much if the battery inside it degrades within two years. This fixture discloses every component because every one of them was built to last.

Frequently Asked Questions

Will the battery charge on cloudy or overcast days?
Yes. The MPPT charge controller continues pulling in usable solar energy on overcast, rainy, or snowy days, when a standard PWM controller in a cheaper fixture would largely stop charging. The 922Wh LiFePO4 battery holds up to 4 days of reserve to carry the light through multi-day stretches of bad weather.

How does this light perform in cold weather?
The battery is rated to charge between 32°F and 122°F. In colder conditions, the battery can still discharge and run the light using its stored charge, but recharging slows or pauses until daytime temperatures rise back above freezing. The 4-day battery reserve is built with this in mind, giving the fixture a buffer through short cold spells.

What happens if snow covers the solar panel?
Heavy snow blocking direct sunlight will reduce charging until it clears. Because the panel sits at an angle rather than lying flat, snow tends to slide off more easily as the panel warms in daytime sun, and any leftover dust or light snow is typically rinsed away by the next rain.

ELEDLights Stands Behind It

• 5-Year Warranty: Full manufacturer coverage backed directly by ELEDLights
• US-based support Monday–Friday, 8am–8pm EST — call, text, or email a real person
• In stock, ships fast straight from our U.S. warehouses

*Estimated minimum coverage at full brightness, based on typical outdoor lighting planning assumptions. Actual coverage depends on mounting height, pole spacing, and site conditions — request a free custom layout from our team for a site-specific recommendation.