One of the Most Versatile Area Lights Around, So You Can Buy and Install With Confidence

This MaxLite AE Switch area light is designed to make your projects easier, quicker, and more cost-effective. With its exceptional versatility, this 200W area light lets you buy one SKU for the whole project and set the wattage, color temperature, and light distribution (Type III, IV, or V) to fit each mounting location, with a choice of mounting for most poles and walls at about 25 to 35 ft high. Built to last with IP66 sealing, two-stage surge protection, and an LED lifespan (L70) of 100,000+ hours, it is designed to outlast competing fixtures, and if site conditions change along the way, the optional remote lets you switch optics and CCT from the ground without paying for a costly lift or labor.

• Switchable Optics, Type III to V: Type III for edges, IV for perimeters, and V for open centers, set with a switch on the fixture or from the ground with the optional remote, so one fixture fits every mounting location. With selectable wattage (150W, 175W, or 200W) and color temperature (3000K, 4000K, or 5000K), that's 27 performance combinations on a single SKU.
• Adjust From the Ground, Skip the Lift: With the optional remote, change distribution and color temperature from the ground up to about 50 ft away, no lift or bucket truck required.
• Precise Light Where You Need It: Every distribution carries a zero uplight (U0) rating, and optional side visors and front or back shields cut glare and spill toward neighbors, roads, and windows.
• Built for Years Outdoors, Easy to Maintain: IP66 sealing, two-stage surge protection, ANSI 3G vibration rating, and an operating temperature range of -40°F to 122°F make this one of the toughest area lights around, with toolless access to the driver compartment for faster service.
• Smart-Controls Ready: A sealed c-Max port accepts photocell, motion-sensing, and networked controls (sold separately) whenever you're ready, from standard to c-Max Network, turning motion into savings. DLC Premium listing qualifies for utility rebates at the highest DLC tier.
• Low Wind Load, Flexible Mounting: A low-EPA housing makes it one of the least wind-vulnerable area lights on the market, so you can use smaller, less expensive poles and reduce total project costs. Choose the mounting that fits your site (flexible arm, slipfitter, straight arm, trunnion, or wall mount), with arms that fit both round and square poles.

Ideal Applications

1. Parking Lots & Drive Lanes: Use Type V at center poles and Type III or IV along edges, then re-tune from the ground when stalls are restriped or traffic patterns change.
2. Site Perimeters & Access Roads: Type III or IV light directed along the route, mounted about 25 to 35 ft high.
3. Neighbor-Sensitive Sites: Zero uplight, plus visors and shields, helps keep light on the property and off nearby homes and windows.
4. Large Lots, Campuses & Industrial Yards: Higher output on taller poles can cover more area per pole, with one switchable fixture across many mounting locations and a durable, low-maintenance build.
5. Smart-Controls Upgrades: Add motion-activated dimming and scheduling later without replacing the fixture.

ELEDLights Stands Behind It

• 5-Year Warranty: MaxLite warranty coverage, purchased through ELEDLights as an authorized MaxLite dealer.
• DLC Premium listed — qualifies for the highest tier of utility rebates
• US-Based support Monday–Friday, 8am–8pm EST — call, text, or email a real person

Versatile Options

Adjustable Square & Round Pole Mount

For use with 4" and 5" square or round poles; rotatable

Square & Round Pole Mount

For use with 4" and 5" square or round poles

Slipfitter Mount

For use with 2-3/8" OD horizontal steel tenon arms

Trunnion Mount

For mounting on walls or poles, with rotational adjustability

Adjustable Wall Mount

For building facades - use 0.5" conduit wiring or J-box mounting

Fixed Wall Mount

For building facades - use 0.5" conduit wiring or J-box mounting