Induction UVC High Bay Disinfection Fixture
badge

Induction UVC High Bay Disinfection Fixture

$4,281.78
SKU: UVHBIMS300W
Quantity:
Need more than a few?
  • Sanitizes in 12 minutes or less
  • For ceilings up to 40 ft
  • Chain-hang suspension
  • 100,000-hour lamp life
  • EPA registered (#98409-1)
  • Made in the USA

Keep Downtime to a Minimum

When you need fast UV surface sanitizing between shifts, look no further than this Induction UVC High Bay Disinfection Fixture. Capable of sanitizing in 4 minutes at a 20-foot installation height or 12 minutes at a 40-foot installation height (see below chart), these powerful fixtures are designed to keep downtime to a minimum. An additional benefit of induction technology is its long life span: 100,000 hours on average. This makes it extremely low-maintenance—always a boon when dealing with high-ceiling fixtures.

Safety

Each fixture has a motion sensor built in to automatically turn the light off if motion is detected. We recommend that UVC fixtures be installed on a circuit separate from your regular lighting. We also recommend a timer switch for the main controller. And while each fixture comes standard with a built-in motion sensor, for additional safety we also recommend grouping fixtures on a control circuit incorporating a motion sensor.

Mounting Height Irradiance/Second Exposure Time Required* Beam Length Beam Width
10 ft 166.92 uW/cm² 1.2 minutes 6.3 ft 6.3 ft
12 ft 121.34 uW/cm² 1.65 minutes 7.6 ft 7.6 ft
15 ft 82.86 uW/cm² 2.5 minutes 9.5 ft 9.5 ft
18 ft 61.15 uW/cm² 3.3 minutes 11.46 11.46
20 ft 51.48 uW/cm² 3.9 minutes 12.74 ft 12.74 ft
22.5 ft 42.61 uW/cm² 4.7 minutes 14.34 ft 14.34 ft
25 ft 36.06 uW/cm² 5.6 minutes 15.92 ft 15.92 ft
28 ft 30.25 uW/cm² 6.7 minutes 17.84 ft 17.84 ft
30 ft 27.21 uW/cm² 7.4 minutes 19.11 ft 19.11 ft
32.5 ft 24.11 uW/cm² 8.3 minutes 20.7 ft 20.7 ft
35 ft 21.59 uW/cm² 9.3 minutes 22.3 ft 22.3 ft
40 ft 17.75 uW/cm² 11.3 minutes 25.5 ft 25.5 ft
*Exposure time is based off of total irradiance. The above calculations are based on 12mJ total exposure. This level of exposure deactivates most organisms.

Warning and Disclaimer: UVC radiation can cause skin burns and eye injuries that may appear hours after exposure has occurred. Avoid direct skin exposure to UVC radiation and never look directly into a UVC light source, even briefly. Inappropriate and improper use of the UV-C products could be dangerous and harmful. Always keep the products away from and out of reach of children. We recommend ANSI Z87.1-1989 eye/face protection, long pants and sleeves, and disposable nitrile gloves when working with or around exposed UV lamps. You are cautioned not to tamper with factory settings.

Shipping

Shipping is free on orders over $499.*

In-stock items typically ship within 24-48 hours.

For our customers located in Canada, Mexico, Puerto Rico, Hawaii, and Alaska, contact us to receive the best shipping and delivery methods possible.

*Custom and wholesale orders, and orders shipping to Alaska, Hawaii, U.S. territoriies, and outside the U.S. may not qualify for free shipping.

Shipping

Shipping is free on orders over $499.*

In-stock items typically ship within 24-48 hours.

For our customers located in Canada, Mexico, Puerto Rico, Hawaii, and Alaska, contact us to receive the best shipping and delivery methods possible.

*Custom and wholesale orders, and orders shipping to Alaska, Hawaii, U.S. territoriies, and outside the U.S. may not qualify for free shipping.

Warranty

All ELEDLights products are warrantied to be free from defects in material and workmanship under normal use and proper installation. Most of our products are warrantied for 5 years or longer. The warranty period is location in the product's Specifications tab.

Should your light fail within its warranty period, we will either replace the failed part or the entire lamp or fixture, depending on the particular product and failure in question. If a replacement part is needed, you will be given instructions on how to change the part out. If a replacement light is warranted, ELEDLights will ship the replacement out once we have received and inspected the failed light.

Warranties do not cover products that have been damaged through improper use, voltage spike, or faulty installation. Our warranties cover only the product itself and not any labor required to install or remove the product, unless specifically noted.

During the first year, shipping on both the defective part and the replacement are free. After the first year, the customer is responsible for shipping defective parts to one of our warehouse locations, and ELEDLights will pay for shipping of the replacement.

Warranty

All ELEDLights products are warrantied to be free from defects in material and workmanship under normal use and proper installation. Most of our products are warrantied for 5 years or longer. The warranty period is location in the product's Specifications tab.

Should your light fail within its warranty period, we will either replace the failed part or the entire lamp or fixture, depending on the particular product and failure in question. If a replacement part is needed, you will be given instructions on how to change the part out. If a replacement light is warranted, ELEDLights will ship the replacement out once we have received and inspected the failed light.

Warranties do not cover products that have been damaged through improper use, voltage spike, or faulty installation. Our warranties cover only the product itself and not any labor required to install or remove the product, unless specifically noted.

During the first year, shipping on both the defective part and the replacement are free. After the first year, the customer is responsible for shipping defective parts to one of our warehouse locations, and ELEDLights will pay for shipping of the replacement.

Returns

ELEDLights offers Risk-Free Returns. If you are not satisfied with your order within 30 days of receipt of shipment, ELEDLights will issue you a full refund. The returned product[s] should be new, uninstalled, and have the original packaging intact. If you would like to start a return, but are unsure about your eligibility, reach out to one of our team members by calling 215.355.7200. We will do our best to work with you to ensure your satisfaction.

Once your return is approved, ELEDLights will provide a UPS label for return shipping. If a defective, nonfunctional, or incorrect item was received, the return shipping will be 100% free.

*Due to the fragility of glass tubes, we accept returns of glass tubes only if they are defective or were damaged in transit.

Please Note: Final credit for a return will be determined after the returned product has been inspected. Special-order, custom, and close-out/clearance items are ineligible for return. Handling fees, on the few products we charge them, are non-refundable.

Returns

ELEDLights offers Risk-Free Returns. If you are not satisfied with your order within 30 days of receipt of shipment, ELEDLights will issue you a full refund. The returned product[s] should be new, uninstalled, and have the original packaging intact. If you would like to start a return, but are unsure about your eligibility, reach out to one of our team members by calling 215.355.7200. We will do our best to work with you to ensure your satisfaction.

Once your return is approved, ELEDLights will provide a UPS label for return shipping. If a defective, nonfunctional, or incorrect item was received, the return shipping will be 100% free.

*Due to the fragility of glass tubes, we accept returns of glass tubes only if they are defective or were damaged in transit.

Please Note: Final credit for a return will be determined after the returned product has been inspected. Special-order, custom, and close-out/clearance items are ineligible for return. Handling fees, on the few products we charge them, are non-refundable.