Brightest LED Retrofit Kit for 4ft or 8ft Fixtures - Spec Grade
badge
badge
2x8 or 2x4 Magnetic LED Retrofit Kit - Four 4ft Strips - 64W / 11,850 lm
badge
badge
2x8 or 2x4 Magnetic LED Retrofit Kit - Four 4ft Strips - 64W / 11,850 lm
badge
badge
2x8 or 2x4 Magnetic LED Retrofit Kit - Four 4ft Strips - 64W / 11,850 lm
badge
badge

2x8 or 2x4 Magnetic LED Retrofit Kit - Four 4ft Strips - 64W / 11,850 lm

Sale price$99.88
Regular price$148.88
Save 33%
SKU: 8C3STRP064DD40
Color Temperature:Natural White (4000K)
Quantity:
Need more than a few?
  • Retrofits 2x8 and 2x4 Fixtures
  • 11,850 Lumens / 64W
  • Buy American Compliant
  • UL Listed, 5-Year Warranty
This kit contains four 4-foot magnetic linear LED retrofit strips with disc magnetic-mount LED driver

Maximum Lumens & Efficiency

Are there areas in your building that would benefit from the brightest light kit available? Whether you’re looking to overhaul an entire warehouse or just target specific areas for high illumination, this fluorescent-to-LED kit gives you the absolute biggest bang available for your buck. With cutting-edge efficiency of 185 lumens/Watt, this kit can convert a 4ft or 8ft troffer to an eye-opening 11,850 lumens of light output, at a fraction of the fixture’s current energy draw.

Pays for Itself

When you switch from T5, T8, or T12 lamps to one of these LED kits, the monthly operating cost of that fixture will be reduced by half. In most cases, the energy savings will pay back the initial conversion investment within the first 2 years of the kit’s 5-year warranty.

Made in the USA & Quality Assured

Our team of lighting experts builds these strips right here in Hatboro, Pennsylvania, and our on-staff engineers inspect each kit before it ships to ensure what you receive from us works exactly as intended. You can trust your new ultra-efficient lighting will last for years to come.

What’s Included

These super-bright, spec grade LED retrofit kits for 4ft or 8ft fluorescent troffers each come with an LED driver, four 4-foot LED strips, wire nuts, connectors, and screws. Each kit converts one 2x8 or 2x4 linear fluorescent troffer to LED. The driver’s built-in 0-10V dimming capability can be accessed when connected to a compatible controller. Dimmer controller not required for standard operation. The kit is available in 4000K or 5000K color temperature to accommodate a wide range of office, retail, warehouse, factory, workshop, and other high-ceiling indoor applications in need of ultra-bright output at low energy cost.

If you will need frosted lenses with your retrofits kits, contact us for pricing.

Why Choose Our Ultra-Efficient LED Kits for Your Lighting Retrofit

Shipping

Shipping is free on orders over $499.*

In-stock items typically ship within 24-48 hours.

For our customers located in Canada, Mexico, Puerto Rico, Hawaii, and Alaska, contact us to receive the best shipping and delivery methods possible.

*Custom and wholesale orders, and orders shipping to Alaska, Hawaii, U.S. territoriies, and outside the U.S. may not qualify for free shipping.

Shipping

Shipping is free on orders over $499.*

In-stock items typically ship within 24-48 hours.

For our customers located in Canada, Mexico, Puerto Rico, Hawaii, and Alaska, contact us to receive the best shipping and delivery methods possible.

*Custom and wholesale orders, and orders shipping to Alaska, Hawaii, U.S. territoriies, and outside the U.S. may not qualify for free shipping.

Warranty

All ELEDLights products are warrantied to be free from defects in material and workmanship under normal use and proper installation. Most of our products are warrantied for 5 years or longer. The warranty period is location in the product's Specifications tab.

Should your light fail within its warranty period, we will either replace the failed part or the entire lamp or fixture, depending on the particular product and failure in question. If a replacement part is needed, you will be given instructions on how to change the part out. If a replacement light is warranted, ELEDLights will ship the replacement out once we have received and inspected the failed light.

Warranties do not cover products that have been damaged through improper use, voltage spike, or faulty installation. Our warranties cover only the product itself and not any labor required to install or remove the product, unless specifically noted.

During the first year, shipping on both the defective part and the replacement are free. After the first year, the customer is responsible for shipping defective parts to one of our warehouse locations, and ELEDLights will pay for shipping of the replacement.

Warranty

All ELEDLights products are warrantied to be free from defects in material and workmanship under normal use and proper installation. Most of our products are warrantied for 5 years or longer. The warranty period is location in the product's Specifications tab.

Should your light fail within its warranty period, we will either replace the failed part or the entire lamp or fixture, depending on the particular product and failure in question. If a replacement part is needed, you will be given instructions on how to change the part out. If a replacement light is warranted, ELEDLights will ship the replacement out once we have received and inspected the failed light.

Warranties do not cover products that have been damaged through improper use, voltage spike, or faulty installation. Our warranties cover only the product itself and not any labor required to install or remove the product, unless specifically noted.

During the first year, shipping on both the defective part and the replacement are free. After the first year, the customer is responsible for shipping defective parts to one of our warehouse locations, and ELEDLights will pay for shipping of the replacement.

Returns

ELEDLights offers Risk-Free Returns. If you are not satisfied with your order within 30 days of receipt of shipment, ELEDLights will issue you a full refund. The returned product[s] should be new, uninstalled, and have the original packaging intact. If you would like to start a return, but are unsure about your eligibility, reach out to one of our team members by calling 215.355.7200. We will do our best to work with you to ensure your satisfaction.

Once your return is approved, ELEDLights will provide a UPS label for return shipping. If a defective, nonfunctional, or incorrect item was received, the return shipping will be 100% free.

*Due to the fragility of glass tubes, we accept returns of glass tubes only if they are defective or were damaged in transit.

Please Note: Final credit for a return will be determined after the returned product has been inspected. Special-order, custom, and close-out/clearance items are ineligible for return. Handling fees, on the few products we charge them, are non-refundable.

Returns

ELEDLights offers Risk-Free Returns. If you are not satisfied with your order within 30 days of receipt of shipment, ELEDLights will issue you a full refund. The returned product[s] should be new, uninstalled, and have the original packaging intact. If you would like to start a return, but are unsure about your eligibility, reach out to one of our team members by calling 215.355.7200. We will do our best to work with you to ensure your satisfaction.

Once your return is approved, ELEDLights will provide a UPS label for return shipping. If a defective, nonfunctional, or incorrect item was received, the return shipping will be 100% free.

*Due to the fragility of glass tubes, we accept returns of glass tubes only if they are defective or were damaged in transit.

Please Note: Final credit for a return will be determined after the returned product has been inspected. Special-order, custom, and close-out/clearance items are ineligible for return. Handling fees, on the few products we charge them, are non-refundable.