Solar LED Pathway & Street Light 2260 lumen
Quickly and easily light up any outdoor location with free, off-the-grid power by using ELEDLIGHTS Pole Mount LED Solar Lights. Each self-contained unit includes its own solar panel, lithium battery, and high lumen LED light source. No wiring or installation by an electrician is necessary. These lights are especially ideal for safety and security illumination in areas where power is either inaccessible or expensive.
A gimbal mounted 50W solar panel, adjustable for maximum sun exposure, charges a 170WH lithium battery during daylight hours. At dusk, the battery supplies power to the light source which provides 2260 lumens of cold white light (5000K) from an array of high quality Bridgelux LEDs. To conserve battery power, a built-in motion sensor allows the unit to be switched to a lower brightness setting during periods of low pedestrian activity and back to full brightness when movement is detected within approximately 30 feet. A small, hand-held remote allows switching the unit into any of 6 different modes that allow you to control time, brightness, and motion activation. The light also includes three color indicators: The blue light indicates charging, the green light indicates the light is on and working, and the red light indicates the light needs to be charged.
Simple Instructions for Use
- For first time use, make sure the unit is fully charged by placing it so that the solar panel is in direct sunlight for at least 4 hours.
- Familiarize yourself with the 6 modes of operation and select the desired mode by pressing whichever button corresponds to that desired mode. Modes include: demo mode, time control (T), light control (L), motion sensor control (M), motion sensor and time control (U), and off mode.
Demo Mode - In any lighting conditions the unit turns on automatically when motion is detected and turns off when motion is no longer detected.
Light Control Mode (L) - At night and in low lighting conditions, the light will operate at 100% brightness for one hour, 70% brightness for three hours and then 20% brightness until dawn. At dawn, the light will turn off. Press the “L” button on the remote to activate.
Time Control Mode (T) - At night or in low lighting conditions, the light will operate at 100% brightness for five hours and then 50% brightness until dawn. Press the “T” button on the remote to activate
Motion Sensor Control Mode (M) - At night or in low lighting conditions, the light will operate at 50% brightness. When motion is detected it will increase to 100% brightness. After four hours the light will operate at 20% brightness until dawn. Press the “M” button on the remote to activate.
Motion Sensor and Time Control Mode (U) - At night or in low lighting conditions, the light will operate at 100% brightness for 2 hours then 60% brightness for another 2 hours. The mode then switches to motion sensor. When motion is detected the light will yield 60% brightness and decrease to 20% brightness when motion is no longer detected. Press the “U” button on the remote to activate.
Off Mode - The light will remain off.
Note: Lighting duration is approximately 36 – 48 hours. The solar light can work continuously for 3 to 5 rainy days without charging the battery. The length of time the solar panel holds its charge depends on amount of sun exposure, weather conditions, and different working modes.
|Light Output||2,260 lumens|
|Efficiency (lumens/Watt)||150 lm/w|
|Average Lamp Life||50,000 hours|
|Recommended Installation Height||16-26 ft. (5-8 m)|
|Enclosure Rating||IP65 (Protected against dust and low-pressure jets of water)|
|Number of LEDs||24|
|Light Type||Solar Fixture|
|Temperature Rating||-20°C~+60°C (-4°F- 140°F)|
|Housing Material||High quality aluminum alloy|
|Qty in Package||1|
|Weight||35 lbs. (16 kg)|
|Additional Specs||Solar Panel- 50W, 18V
Lithium Battery- 170 WH