Ecobright 8ft LED Tube T8/T12
Replacing Old Lights? Use our Savings Calculator and see in seconds how much you could save!
Open the Calculator
Install these lights in your fluorescent fixtures and enjoy not having to think about tube lights again—for years. Our Ecobright 40W 8-foot LED fluorescent replacement bulbs will give you the same, if not better, light as the F96T12 or F96T8 tubes you're replacing while lasting nearly twice as long and costing nearly half as much to run. And since we ship them to your door, you don't even have to figure out how you're going to fit 8 foot long tubes in your car!
Replace 8 foot fluorescent with LED and never look back, especially when you choose the Ecobright 8 foot LED Tube Light, which was manufactured specifically to hit a low price point without compromising quality.
Inside the Ecobright, the attention that goes into its manufacturing is clearly visible. Its internal driver is shielded from any dust, dirt, and debris that might find its way into your fixture's housing, and 240 closely spaced, evenly distributed LEDs ensure bright light along the full length of the tube. And, because we're shipping the lights to you, we take extra care in the packaging, so that your lights arrive ready to install, with no delays or disappointments.
The Ecobright LED lights are also commercial grade—install them in your warehouse, factory, barn, and any other location where replacing burned-out lamps is a chore. They work with both T8 and T12 fixtures. The ballast-bypass design means you'll eliminate not only the energy draw of your fixture's ballast but a frequent failure point too—no more dead ballasts! And with an average operating life of 50,000 hours, these LED replacements for F96T12 and F96T8 tubes will give you a long break from lamp replacements.
We've sold more than 44,000 of our base-model 8 foot LED tube lights, and they only thing most of our customers regret is not replacing their fluorescents sooner. Order yours today & by this time next week you too could be enjoying bright, reliable lights while your light bill shrinks.
Note: If your fixture has an electronic ballast, don't forget to add new lampholders to your cart. You'll need one fixed and one plunger style for each bulb. See our accessories section above.
|Light Output||4,500 lumens (+/- 100)|
|Efficiency (lumens/Watt)||112.5 lm/W|
|Average Lamp Life||50,000 hours|
|Color Temperature||Cool White: 5500K - 6000K Cold/Daylight|
|Base Type||Single Pin|
|Beam Angle||120 °|
|Beam type||Standard Tube|
|Ballast Compatibility||Any - Remove Ballast Before Installing Tube|
|Installation Method||Click for install instructions|
|Recommended Installation Height||Up to 15'|
|Number of LEDs||240|
|Light Type||Retrofits and Conversion Kits|
|Qty in Package||1|
|Dimensions||93.7" long x 1.14" diameter|
Check out the installation video in the image gallery at the top of this page.