300W LED Shoebox Area Light
Bright & Rugged Parking Lot Luminaire
Ideal for mid- to large-sized parking lots, university and industrial campuses, car dealerships, sports parks, marine harbors, and other public areas, the 300W Ecobright LED shoebox light replaces—and provides enormous energy savings in comparison to—1000W metal halide (MH) and high pressure sodium (HPS) outdoor area lighting. Due to its 3G vibration rating, this fixture can also be used for roadways, including along bridges and overpasses.
The Ecobright 300W shoebox fixture features rugged, one-piece die-cast aluminum housing that is fully sealed to prevent contamination by moisture, dust, dirt, insects, or other debris. The housing’s low-profile design minimizes wind load requirements. Recommended mounting height is 40-50 feet. With its T3 beam, this fixture can be installed along the perimeter of the area to be lit or, when mounted back-to-back on a pole, two fixtures create an umbrella of light ideal for more central lighting. T4 and T5 beams are also available—contact us with your needs.
- Minimized installation costs—this fixture can be installed by one person
- IP65 rated & UL wet location listed housing withstands weather conditions
- Optional photosensor provides automatic dusk-to-dawn operation
- DLC Qualified for utility rebate eligibility
Flexible Mounting Options
Because every application is different, we offer a range of mounting hardware options. Choose the appropriate hardware for your installation from the Accessories section when you order your shoebox fixtures.
For 4" and 5" square or round poles
For horizontal steel tenon arms, nominal 2" (2-3/8" OD pipe size)
For building facade, use ½” conduit wiring or J-box mounting
Install the shoebox at an angle, as you would a flood light
|Light Output||41,000 lumens|
|Efficiency (lumens/Watt)||137 lm/w|
|Average Lamp Life||50,000 hours|
|Beam Angle||T3 (pushes light forward)|
|Enclosure Rating||IP65 (Protected against dust and low-pressure jets of water)|
|Input Voltage||120-277 VAC|
|Temperature Rating||-40°F - 113°F|
|Housing Material||Die-cast aluminum with PC|
|Housing Color||Dark bronze|
|Qty in Package||1|
|Dimensions||15.16” x 12.25” x 2.46” without mounting bracket|
|DLC Model #||Pending|
Effective Projected Area (EPA) Ratings for Pole Mounting
The low-profile design of our Ecobright shoeboxes means lower EPA values & increased likelihood our fixtures will be suitable for your existing poles. If you're replacing old fixtures and planning to re-use your existing poles, choose a fixture/configuration that is at or lower than your existing fixtures' EPA. If you're installing all new poles, use the EPA values below to aid in selecting the appropriate poles.
2 @ 90°
2 @ 120°
2 @ 180°
3 @ 90°
3 @ 120°