2x4 Troffer-Mount UVC Disinfecting Fixture

In stock
Recessed UVC disinfecting fixture for inverted T-bar grid ceilings
  • Up to 500 sq ft of coverage
  • Low-profile for compact/shallow spaces
  • Mounting frame available for dry wall ceilings
  • Built-in earthquake brackets
  • EPA registered (#98409-1)
  • Made in the USA

Germicidal UVC Lighting for Suspended Ceilings

This low-profile recessed troffer brings UVC surface disinfection to offices, classrooms, exam rooms, daycare facilities, and more—any location with either an inverted T-bar drop ceiling or a dry wall ceiling (optional mounting frame required for dry wall installations). Each fixture covers up to 500 square feet, depending on ceiling height.

Safety & Installation

We recommend that UVC fixtures be installed on a circuit separate from your regular lighting. We also recommend a timer switch for the main controller. And while each fixture comes standard with a built-in microwave motion sensor, for additional safety we also recommend grouping fixtures on a control circuit that incorporates a motion sensor.

Warning and Disclaimer: UVC radiation can cause skin burns and eye injuries that may appear hours after exposure has occurred. Avoid direct skin exposure to UVC radiation and never look directly into a UVC light source, even briefly. Inappropriate and improper use of the UV-C products could be dangerous and harmful. Always keep the products away from and out of reach of children. We recommend ANSI Z87.1-1989 eye/face protection, long pants and sleeves, and disposable nitrile gloves when working with or around exposed UV lamps. You are cautioned not to tamper with factory settings. Additionally, UV exposure can degrade some materials. To minimize risk of degradation, we recommend running any light only for the time necessary to achieve sanitation of the target area.

Wavelength254 nm peak
Base TypeFixture
Safety FeaturesMicrowave motion sensor
Occupancy SensorYes
Average Lamp Life8,000 hours
Input Voltage120-277 V AC, 50/60 Hz
Housing MaterialCold rolled steel with corrosion-resistant nanoceramic treatment and flat white powder coat finish
Dimensions48" x 23.75" x 5.5"
CertificationCETL, ETL, EPA

There are no Support Documents for this product.

Write Your Own Review
You're reviewing:2x4 Troffer-Mount UVC Disinfecting Fixture
Your Rating
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Questions? Call 215.355.7200, text 267.266.8330, or email lights@eledlights.com.

Ask us about competitor price matches, volume discounts, financing, light coverage, dialux simulations and more!

Copyright © 2022 eledlights.com, Inc. All rights reserved.