2x2 Troffer-Mount UVC Disinfecting Fixture

$650.00
In stock
SKU
UVTMMS2X2
Recessed UVC disinfecting fixture for inverted T-bar grid ceilings
  • Up to 200 sq ft of coverage
  • Low-profile for compact/shallow spaces
  • Mounting frame available for dry wall ceilings
  • Built-in earthquake brackets
  • EPA registered (#98409-1)
  • Made in the USA
Accessories

UVC Disinfecting Light for Drop Ceilings

High UVC light output in a compact form factor provides germicidal sanitation in locations with drop-ceiling grids. It can also be installed in dry wall ceilings using the optional mounting frame. Thanks to the fixture's low profile (5.5"), it can be installed in shallow ceiling spaces. Each germicidal 2x2 troffer light treats up to 200 sq ft, depending on mounting height.

This is an excellent UV surface sanitizing solution for office buildings, retail locations, schools, daycare facilities, medical centers, industrial parks, and more. Must be used during unoccupied periods: after hours or between shifts.

Safety Features

Because UVC exposure can harm skin and eyes, a microwave motion sensor is built into the fixture to automatically shut off the lamps when motion is detected. The fixture also has built-in earthquake brackets.

Installation

We recommend that UVC fixtures be installed on a circuit separate from your regular lighting. We also recommend a timer switch for the main controller. And while each fixture comes standard with a built-in motion sensor, for additional safety we also recommend grouping fixtures on a control circuit that incorporates a motion sensor.

Warning and Disclaimer: UVC radiation can cause skin burns and eye injuries that may appear hours after exposure has occurred. Avoid direct skin exposure to UVC radiation and never look directly into a UVC light source, even briefly. Inappropriate and improper use of the UV-C products could be dangerous and harmful. Always keep the products away from and out of reach of children. We recommend ANSI Z87.1-1989 eye/face protection, long pants and sleeves, and disposable nitrile gloves when working with or around exposed UV lamps. You are cautioned not to tamper with factory settings. Additionally, UV exposure can degrade some materials. To minimize risk of degradation, we recommend running any light only for the time necessary to achieve sanitation of the target area.

Wavelength254 nm peak
Wattage60W
Base TypeFixture
Safety FeaturesMicrowave motion sensor
Occupancy SensorYes
Review
Average Lamp Life8,000 hours
Input Voltage120-277 V AC, 50/60 Hz
Housing MaterialCold rolled steel with corrosion-resistant nanoceramic treatment and flat white powder coat finish
Dimensions24" x 23.75" x 5.5"
CertificationCETL, ETL, EPA

There are no Support Documents for this product.

Write Your Own Review
You're reviewing:2x2 Troffer-Mount UVC Disinfecting Fixture
Your Rating
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Questions? Call 215.355.7200, text 267.266.8330, or email lights@eledlights.com.

Ask us about competitor price matches, volume discounts, financing, light coverage, dialux simulations and more!

Copyright © 2021 eledlights.com, Inc. All rights reserved.