Solar LED Security Motion Light with extended bracket
ELEDLIGHTS 1000 Lumen Solar-Powered LED Security Light is the largest and brightest of our all-in-one, motion-activated solar lights. Like our 450 and 800 lumen units, it is an extremely simple and trouble-free way to improve safety and security any place light is needed.
As bright as a heavy-duty 75W halogen flood light, it requires no wiring and installs in minutes. A versatile aluminum mounting pole and bracket are included that allow the unit to be mounted in a wide variety of positions for optimal illumination.
At dusk or in low-light conditions, the light will emit 1000 lumens at full power from an array of 81 super-bright, 2835 SMD LEDs. Its multiple operating modes provide a variety of options for conservation of battery power. In modes 1 and 2 the light will operate in full power mode and can last for approximately 8-9 hours. In mode 3, at low power, the light will still last for approximately 6-7 hours before its internal 3.7V lithium battery needs recharging.
Simple Instructions for Use
- For first time use, make sure the unit is fully charged by placing it so that the solar panel is in direct sunlight for at least 6 hours.
- To test the unit, set it on a table with the solar panel face down. You can also perform the test in a darkened environment.
- Press and hold the mode button (located next to the motion sensor) for approximately 3-5 seconds. The light will turn on.
- Familiarize yourself with the various modes of operation. Select the desired mode by pressing and quickly releasing the mode button. After releasing the button, the light will flash. The light will flash twice as you enter each mode.
Mode 1 - Press and hold the mode button for 3-5 seconds. The light will flash twice. At dusk or in low light conditions, the light turns on automatically at full brightness. After 15 seconds it will dim until motion is detected. Once motion is detected the light will return to full brightness.
Mode 2 - Press the button again, the light will flash twice. At dusk or in low light conditions, the light remains off until motion is detected. When motion is detected the light turns on at full brightness and turns off after 15 seconds of no activity.
Mode 3 - Press the button a third time, the light will again flash twice. At dusk or in low light conditions, the light will turn on at half brightness. The light will automatically shut off after approximately 5 hours.
Press the button a fourth time, the light will turn off and remain off.
Note: Rapid flickering or strobing of the light (prior to the light turning off) is an indication that charging is needed. The length of time the Solar Motion Light holds its charge is a function of sun exposure, temperature, and weather conditions.
|Light Output||1,000 lumens|
|Efficiency (lumens/Watt)||125 lm/w|
|Average Lamp Life||50,000 hours|
|Installation Instructions URL||www.eledlights.com/product_manuals/1000LumenSolarLEDLight_UserGuide.pdf|
|Enclosure Rating||IP65 (Protected against dust and low-pressure jets of water)|
|LED Type||SMD 2835|
|Number of LEDs||81|
|Light Type||Solar Fixture|
|Temperature Rating||-20°C~+60°C (-4°F- 140°F)|
|Housing Material||Hard Plastic|
|Qty in Package||1|
|Dimensions||272 x 161 x 65 mm|
|Weight||2.2 lbs. (1.02 kg)|
|Additional Specs||Solar Panel: 6V, 5W; Battery: 3.7V, 10,000 MAH|